Categories
Price Range
Manufacturers
Themes
    Home > Products > Flight Controllers > MATEKSYS FC F405 FC-STD
    MATEKSYS FC F405 FC-STD
    enlarge

    MATEKSYS FC F405 FC-STD

    RM120.00  
    Item details
    SKU: MATEK FC F405 FC-OSD
    Weight: 1 grams
    Stock: Stock available

    Brand: MATEKS SYSTEMS
      Share This   Add To Facebook   Add To MySpace   

    SPECS

      • MCU: 168MHz STM32F405RGT6
      • IMU: 32K ICM20602 gyro/accelerometer (SPI)
      • Baro: BMP280 (I2C)
      • OSD: BetaFlight OSD w/ AT7456E chip
      • Blackbox: MicroSD card slot (SD/SDHC)
      • VCP, UART1, UART2, UART3, UART4, UART5
      • Built in inverter for SBUS input (UART2-RX)
      • PPM/UART Shared: UART2-RX
      • SoftSerial on TX2, S5 or S6 optional
      • Camera control on S6 or DAC optional
      • Smartaudio & Tramp VTX protocol supported
      • Battery Voltage Sensor: 1:10
      • Current Sensor: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)
      • BEC 5V: No (FCHUB-6S, FCHUB-VTX, FCHUB-W option)
      • LDO 3.3V: Max.300mA
      • I2C1 SDA & SCL: Yes
      • WS2812 Led Strip : Yes
      • Beeper : Yes
      • RSSI: Yes
      • 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
      • 6x PWM / DShot outputs without conflict
      • 2x 2812LED outputs option
      • 5x UARTs
      • 1x Group of 5V/G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
      • 4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
      • 1x pair I2C1 pads
      • 1x Side-press button for BOOT(DFU) mode
      • 1x 16pin bottom mounted FFC Slot for FCHUB-6S, FCHUB-VTX or FCHUB-W connection
      • 36x36mm PCB with 30.5mm mounting holes
      • w/ 2x 0.5mm*16Pin 5cm Flexible Flat Cable
      • w/ 4pcs M3 Anti-vibration Standoffs

    CONNECTION GUIDE

    HUBOSD8-SE_EN

    Tips: Pull out the plastic locking bar carefully so as not to break it.

    F405-OSD_FFC

    HUBOSD8-SE_EN